TYPE A
Early strength
Supports early strength development while maintaining fluidity.
← Back to SUNHAKKA
SUNHAKKA / PCE
PCE admixtures · Type A–G
Select a performance direction for your concrete mix. We can tailor a formulation after checking cement compatibility, aggregates, temperature and delivery time.
Find the right performance profile
These Type A–G descriptions are application profiles for product selection. Final product grade, dosage and measured results must be confirmed by the current technical data sheet and trial mix.
TYPE B
Balanced workability
Balanced water reduction and handling for general concrete.
TYPE C
High water reduction
Designed for lower water demand and higher flow at a suitable dosage.
TYPE D
Slump retention
Medium water reduction with slump retention and extended working time.
TYPE E
Extended setting control
Emphasizes placement time and controlled setting in challenging site conditions.
TYPE F
Pumpability
Targets cohesive flow and steady pumping for placement efficiency.
TYPE G
High reduction + retention
Combines high water reduction, slump retention and extended working time.
Finished admixture lines
SUNRISE MATERIAL (THAILAND) CO., LTD. offers PCE-based solutions. Select the grade after testing with the customer's cement, aggregates and required delivery time.
High water reduction
For mixes seeking lower water demand and flow. Check setting, cohesion and compressive strength in trials.
Reduction + retention
Balances initial water reduction with workability over the agreed transport and placement window.
Long slump retention
For longer delivery or hot-weather placement. Verify setting time and early strength before use.
Current V5F/V5G grades include V5F@310, V5F@330, V5G@3510, V5G@308, V5G@410 and V5G@406. Grade-specific values are provided only with a current data sheet and test report.
SUNRISE MATERIAL (THAILAND) CO., LTD.
Finished concrete admixtures
Four product grades from the company's Thai brochure. Choose a grade through laboratory trials with the actual cement, aggregates, temperature and delivery time.
TYPE D · 507D
Water reduction with set retardation
For concrete needing longer working time in hot conditions or on longer routes. The brochure describes improved flow and reduced mixing water while controlling slump loss.
TYPE A & D · V5A&D
Water reduction and extended setting
A combined water-reducing and retarding grade for concrete in hot weather or difficult placements. The brochure positions it for general ready-mix cost and workability control.
TYPE F · V5F
High water reduction and early strength
High-range water reducer for high-strength and precast concrete. The brochure highlights faster early strength development and applications such as bridges, beams, slabs and dense reinforcement.
TYPE G · V5G
High water reduction with set retardation
For mixes requiring strong water reduction and longer workability in hot weather or extended transport. The brochure describes slump-loss control and high-strength concrete applications.
Compare the grades
| Grade | Main function | Typical application | Brochure dosage |
|---|---|---|---|
| 507D · D | Water reduction; delayed setting | Hot weather; longer transport | 200–500 mL / 100 kg |
| V5A&D · A/D | Water reduction; delayed setting | General ready-mix; difficult placement | 300–600 mL / 100 kg |
| V5F · F | High water reduction; early strength | High-strength; precast; structural work | 600–2,000 mL / 100 kg |
| V5G · G | High water reduction; longer workability | Hot weather; extended delivery | 600–2,000 mL / 100 kg |
Dosage units are millilitres per 100 kg of cement in the supplied brochure. Compare results by trial mix; these ranges do not replace a current product data sheet.
The dosage and physical ranges above are transcribed from the supplied Thai brochure, not a current certificate of analysis. Confirm the current technical data sheet and trial mix before specifying or ordering.
PCE raw materials
SUNHAKKA (THAILAND) CO., LTD. supplies PCE mother liquors and blending ingredients. Select grades after checking cement compatibility and the required concrete performance.
SHK-803
High water-reducing PCE mother liquor. The supplied brochure describes a 50% liquid concentrate for formulation trials where water reduction and flow are priorities.
SHK-802
PCE mother liquor combining medium water reduction with slump retention. Check workability during transport and setting time with the customer's materials.
SHK-804
Long-retention PCE mother liquor for longer transport or placement windows. Verify the required retention period and setting with actual mix trials.
SHK-SG · Sodium gluconate
Crystalline blending ingredient used to adjust concrete setting. The brochure lists 25 kg bags. Establish dosage through cement compatibility and setting tests.
SHK-50 · Sodium lignosulphonate
Modified lignin-based water-reducing ingredient for concrete admixture blends; the supplied brochure also lists ceramic applications. Check concentration and mix performance before use.
Based on the company-supplied SUNHAKKA Raw materials brochure. Confirm current specifications, availability and packaging before ordering.
Technical parameters to confirm
Numerical values vary by formulation, cement source, mix design and temperature. Request the grade-specific technical data sheet and test report before setting a specification. Recommended dosage is established through laboratory and site trials.
Liquid properties: appearance, solid content, density, pH and chloride content
Fresh concrete: water reduction, initial slump/flow, retention at agreed intervals, air content and setting time
Hardened concrete: compressive strength at the project ages, including 1, 3, 7 and 28 days where relevant
Discuss a trial mix
Share your cement type, target strength, required slump, transport time and ambient conditions so we can recommend a suitable grade and testing plan.
Contact SUNHAKKA ↗